The Blueprint

Physical and environmental.

Premises, equipment and paper: controlling entry and visitors, locking screens and clearing desks, protecting equipment on the move and in its rooms, and wiping or destroying it at the end of its life.

PHY 16 requirements

Foundation

RW-PHY-01Premises locked and entry controlled

What
Control the way into your premises with locks or access cards, so that only the people you have authorised can get in.
Why
Anyone who can walk in can walk out with a laptop, plug a device into your network or read what has been left on desks, so controlling the way in limits those risks to people you have chosen to trust.
Protects
Confidentiality

RW-PHY-02Visitors signed in and accompanied

What
Sign every visitor in and out, give them a badge they wear where it can be seen, and keep them accompanied whenever they are beyond the public areas.
Why
Recording and accompanying visitors stops someone posing as a contractor, an interviewee or a courier from wandering round unchallenged, and the record shows who was on site if something later goes missing.
Protects
Confidentiality

RW-PHY-03Screens that lock when left

What
Set every computer, tablet and phone to lock itself after a few minutes without use and to need a PIN, password or fingerprint to unlock.
Why
A device left unlocked lets anyone nearby read, send or change information as if they were its owner, so an automatic lock shrinks that chance to the few minutes before it takes effect.
Protects
Confidentiality

RW-PHY-04Equipment and papers kept safe on the move

What
Require staff to keep laptops, phones, storage media and papers with them, or locked away out of sight, whenever they take them away from the office, and never to leave them in an unattended vehicle.
Why
Equipment and papers are far more exposed in cars, on trains, in cafés and at home than in the office, so keeping them close or locked away removes the easiest chances for theft and the breaches that follow.
Protects
Confidentiality

RW-PHY-05Storage wiped before equipment leaves your hands

What
Wipe or destroy the storage in every computer, phone, printer and other device before it is reused by someone else, sold, returned or thrown away.
Why
Deleting files or resetting a device often leaves information that free tools can recover, so wiping or destroying the storage properly makes sure the next owner can't read anything you held on it.
Protects
Confidentiality

RW-PHY-06Desks cleared and papers locked away

What
Require staff to lock away papers and removable storage holding sensitive information at the end of each day and whenever they leave their desk for a long time.
Why
Papers and memory sticks left out can be read, photographed or picked up by cleaners, visitors and anyone else passing, so putting them away keeps them from people who have no need to see them.
Protects
Confidentiality

Established

RW-PHY-07Rooms with key equipment restricted

What
Limit entry to server rooms, comms cupboards and other rooms holding important equipment or information to a named list of people, keep that list up to date, and set rules for working in them, such as escorting visitors and not taking photographs.
Why
Someone who can reach your servers or network equipment in person can steal, damage or tamper with them, often getting round every other safeguard, so keeping these rooms to a short list of people closes off that route.
Protects
Confidentiality · Integrity · Availability

RW-PHY-08Equipment placed and housed safely

What
Place servers, network equipment and network storage where they are out of reach of passing people and away from hazards such as water pipes, windows and heat sources.
Why
Where equipment sits affects how easily it can be tampered with, knocked, flooded or overlooked, so housing it well from the start avoids damage and interference that would be costly to put right.
Protects
Integrity · Availability

RW-PHY-09Equipment rooms protected from fire, water and heat

What
Protect rooms holding important equipment against fire, water and overheating, with detection, suitable fire suppression and cooling, and have each of these tested.
Why
Fire, leaks and overheating can destroy equipment and the information on it within minutes, so spotting them early and limiting the damage stops a problem with the building from becoming the loss of your systems.
Protects
Availability

RW-PHY-10Power that doesn't fail suddenly

What
Protect important equipment from power cuts and surges with an uninterruptible power supply that keeps it running long enough to shut down safely or move to a backup supply.
Why
A sudden loss of power can corrupt data and damage equipment as well as halting work, so a short-term supply gives your systems time to close down cleanly or carry on until the power returns.
Protects
Availability

RW-PHY-11Cables protected from harm

What
Route and protect power and network cables so that they can't easily be damaged, cut or tapped into.
Why
Exposed cables can be damaged by accident or interfered with on purpose, cutting off services or letting someone listen in, so protecting their routes keeps your systems connected and your traffic private.
Protects
Confidentiality · Availability

RW-PHY-12Equipment maintained by trusted people

What
Allow only engineers you have authorised to work on important equipment, and check any device that has been away for repair before it is used again.
Why
Controlling who works on your equipment and checking what comes back stops a maintenance visit or a repair from becoming a chance to take information or tamper with a device.
Protects
Integrity

RW-PHY-13Premises alarmed and watched

What
Fit an intruder alarm to your premises, with CCTV where the risk justifies it, and make sure someone responds to its alerts when the building is empty.
Why
Alarms and cameras put off would-be intruders and raise the alert quickly when a break-in happens, so a theft or an attempt at tampering is interrupted, or at least recorded, rather than discovered the next morning.
Protects
Confidentiality

Advanced

RW-PHY-14Entry records reviewed

What
Review the records of who has entered your restricted rooms regularly, and follow up any entry that has no clear reason.
Why
Entry records only help if someone reads them, and checking them catches borrowed access cards, people following others through doors and unexpected visits to sensitive rooms that would otherwise go unnoticed.
Protects
Confidentiality

RW-PHY-15Deliveries kept apart from the rest of the building

What
Take in deliveries and collections at a point that doesn't lead into the rest of the building, and inspect incoming items before they are taken any further.
Why
Delivery points are a natural place for outsiders to come and go, so keeping them separate and checking what arrives stops them becoming an unwatched way in and picks up tampered or suspicious items early.
Protects
Integrity

RW-PHY-16Physical threats weighed when choosing a site

What
Assess the hazards a site faces, such as flooding, fire spreading from neighbours, local crime or reliance on a single power or network feed, before taking it on and whenever it changes significantly.
Why
Some threats can only be dealt with sensibly at the start, so assessing them before you commit to a site, or alter one, lets you pick a safer location or plan the right protection rather than finding the weakness after an incident.
Protects
Availability